Desmomelt U 230
Aliphatic high-molecular-weight polyester-polyurethane adhesive raw material.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Aliphatic high-molecular-weight polyester-polyurethane adhesive raw material.
Desmomelt® U 230 is a solid raw material for the formulation of non-yellowing, thermally activated adhesives. Desmomelt® U 230 is particularly well suited for applications with low thermal activation temperatures as e.g. in automotive trim, textile, footwear and furniture applications. Desmomelt® U 230 can be used as a hotmelt applied as a filament, foil or powder, as well as a raw material for non-yellowing solvent-based contact and/or heat activated adhesives.
Desmomelt® U 230 is a solid raw material for the formulation of non-yellowing, thermally activated adhesives. Desmomelt® U 230 is particularly well suited for applications with low thermal activation temperatures as e.g. in automotive trim, textile, footwear and furniture applications. Desmomelt® U 230 can be used as a hotmelt applied as a filament, foil or powder, as well as a raw material for non-yellowing solvent-based contact and/or heat activated adhesives.
Storage Conditions
Recommended storage temperatures: Temperatures higher than 30 °C should be avoided. Temperatures above 45 °C will lead to caking.
Protect from direct sunlight, heat, moisture and foreign material.
Protect from direct sunlight, heat, moisture and foreign material.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Recommended processing temperature for automated application | °C | 240 - 280 | |
| Density | ISO 1183 | g/cm^3 | approx. 1.2 |
| Hot tack life (Depends on application conditions) | min | 3 - 6 | |
| Minimum extrusion temperature | °C | 150 | |
| Heat resistance | °C | approx. 60 | |
| Minimum activation temperature | DIN EN 12961 | °C | 60 - 70 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Solution viscosity 15 w% in butanone-2 (MEK) / water (95:5 w/w) at 23°, (30 rpm) | M001 | mPa*s | approx. 500 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
