Bayhydrol® A 2770
Aqueous hydroxyfunctional polyacrylic dispersion, in combination with aliphatic polyisocyanates for waterborne 2K-polyurethane coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Aqueous hydroxyfunctional polyacrylic dispersion, in combination with aliphatic polyisocyanates for waterborne 2K-polyurethane coatings.
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: > 0 - 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10 % solution of dimethyl ethanol amine.
Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: > 0 - 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10 % solution of dimethyl ethanol amine.
Contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Acid value | DIN EN ISO 2114 | mg KOH/g | approx. 11 |
| Hydroxyl content calculated | % | approx. 3.9 | |
| Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.06 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C, D = approx. 40 s^-1 | DIN EN ISO 3219/A.3 | mPa*s | ≤ 1,200 |
| Non-volatile content (1 g/1 h/125 °C/circulating air oven) | DIN EN ISO 3251 | % | 42 - 46 |
| pH-value (supply form) | DIN ISO 976 | 7 - 9 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
