- Coatings, paints & inks
Bayhydrol® A 145
Water-reducible, hydroxyfunctional polyacrylic dispersion. In combination with aliphatic polyisocyanates to formulate aqueous two-component clear- and topcoats.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Acrylate dispersion
Material
- Coatings, paints & inks
- Elastic, Hard, Waterborne, Flexible
General Characterization
Water-reducible, hydroxyfunctional polyacrylic dispersion.
In combination with aliphatic polyisocyanates to formulate aqueous two-component clear- and topcoats for vehicle repair applications, heavy transport finishing and industrial coating.
In combination with amino resins or blocked polyisocyanates for waterborne, one-component, industrial baking coatings.
In combination with aliphatic polyisocyanates to formulate aqueous two-component clear- and topcoats for vehicle repair applications, heavy transport finishing and industrial coating.
In combination with amino resins or blocked polyisocyanates for waterborne, one-component, industrial baking coatings.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: > 0 ≤ 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product, but the viscosity may increase significantly. Prolonged freezing can damage the product irreversibly.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be restored to its original value by the addition of small amounts of an aqueous 10 % solution of dimethylethanolamine. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: > 0 ≤ 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product, but the viscosity may increase significantly. Prolonged freezing can damage the product irreversibly.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be restored to its original value by the addition of small amounts of an aqueous 10 % solution of dimethylethanolamine. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 20 °C | DIN EN ISO 2811-2 | g/ml | approx. 1.06 |
| Flash point | DIN EN ISO 1523 | °C | approx. 53 |
| OH % on solid | calculated | % | approx. 3.3 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C, D = 41,28 s^-1 | DIN EN ISO 3219/A.3 | mPa*s | 950 ± 550 |
| pH-value | DIN ISO 976 | 7.2 - 8.2 | |
| Non-volatile content (1g/1h/125 °C/convection oven) | DIN EN ISO 3251 | % | 45 ± 2 |
| Acid value | DIN EN ISO 2114 | mg KOH/g | 10 ± 3 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
