- Adhesives
Dispercoll® U 2824
Aqueous anionic polyurethane dispersion for the formulation of adhesive dispersions. Contains carboxyl groups in the polymer chain and is crosslinkable with the polycarbodiimide from Desmodur® XP 2802
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- PU dispersion
- PU dispersion - high molecular
- Waterbased dispersion
- Polyurethane
Material
- Adhesives
- Waterborne, Fast bonding, Heat activated, Heat resistant
General Characterization
Aqueous polyurethane dispersion.
Dispercoll® U 2824 is a waterborne dispersion of an anionically modified polyurethane. It is a raw material for the formulation of adhesive dispersions. Dispercoll® U 2824 contains carboxyl groups in the polymer chain that can be crosslinked with the polycarbodiimide from Desmodur® XP 2802 to produce high-quality adhesive bonds.
Dispercoll® U 2824 is a waterborne dispersion of an anionically modified polyurethane. It is a raw material for the formulation of adhesive dispersions. Dispercoll® U 2824 contains carboxyl groups in the polymer chain that can be crosslinked with the polycarbodiimide from Desmodur® XP 2802 to produce high-quality adhesive bonds.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 23 °C.
- Protect from direct sunlight, frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Temperatures higher than 30 °C should be avoided. Prolonged storage at higher temperatures may affect the product properties. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.
- Recommended storage temperature: 5 - 23 °C.
- Protect from direct sunlight, frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Temperatures higher than 30 °C should be avoided. Prolonged storage at higher temperatures may affect the product properties. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Minimum film forming temperature | DIN ISO 2115 | °C | approx. 5 |
| Acid value (Initial value) | DIN EN ISO 2114 | mg KOH/g | approx. 3.9 |
| Density of the dispersion | DIN 51 757 | g/cm3 | approx. 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C,spindle L 2 / 30 rpm | DIN EN ISO 2555 | mPa*s | 50 - 1,000 |
| Non-volatile content (1g / 1h / 125 °C) | DIN EN ISO 3251 | % | 38 - 41 |
| pH-value | DIN ISO 976 | 6.0 - 9.0 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
