- Adhesives
Dispercoll® U 2682
Aqueous polyurethane dispersion.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Waterbased dispersion
- PU dispersion - high molecular
- PU dispersion
Material
- Adhesives
- Moisture resistant, Fast bonding, Waterborne, Heat resistant, Heat activated
General Characterization
Aqueous polyurethane dispersion.
Dispercoll® U 2682 is a waterborne dispersion of a anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the packaging, automotive, shoe or furniture industries. Its characteristic polymer properties make Dispercoll® U 2682 particularly well suited for bonds with low heat activation temperatures.
Dispercoll® U 2682 is a waterborne dispersion of a anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the packaging, automotive, shoe or furniture industries. Its characteristic polymer properties make Dispercoll® U 2682 particularly well suited for bonds with low heat activation temperatures.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 23 °C.
- Protect from direct sunlight, frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Temperatures higher than 30 °C should be avoided. Prolonged storage at higher temperatures may affect the product properties. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.
- Recommended storage temperature: 5 - 23 °C.
- Protect from direct sunlight, frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Temperatures higher than 30 °C should be avoided. Prolonged storage at higher temperatures may affect the product properties. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Minimum film forming temperature | DIN ISO 2115 | °C | approx. 5 |
| Density of the dispersion | DIN 51 757 | g/cm3 | approx. 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Non-volatile content (1g / 1h / 125 °C) | DIN EN ISO 3251 | % | 49 - 51 |
| pH-value | DIN ISO 976 | 6.0 - 9.0 | |
| Viscosity at 23 °C,spindle L 2 / 30 rpm | M092-ISO 2555 | mPa*s | < 1,000 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
