- Thermoplastic Polyurethanes
Desmopan 9665DU
Extrusion- and injection molding grade; with special UV stabilizers; transparent up to 6 mm wall thickness; very good hydrolysis and microbial resistance; Application; Ski boot shells; Hoses, non-reinforced; Pneumatic hoses
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Thermoplastic Polyurethanes
- Chemical resistant, Scratch resistant, Wear resistant, Weather resistant, Tear resistant, Transparent, Cold-flexibility, Abrasion resistant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Maximum drying temperature | - | °C | 110 | |
| 射出成形-溶融温度 | - | °C | 220 - 235 | |
| 射出成形-金型温度 | - | °C | 40 - 60 | |
| 押出-溶融温度 | - | °C | 205 - 235 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Tensile storage modulus | ISO 6721-1,-4 | -20 °C | MPa | 2250 |
| Tensile storage modulus | ISO 6721-1,-4 | 20 °C | MPa | 816 |
| Tensile storage modulus | ISO 6721-1,-4 | 60 °C | MPa | 215 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Compression set | DIN ISO 815-1, Method A | 24 h; 70 °C | % | 50 |
| Compression set | DIN ISO 815-1 | 72 h; 23 °C | % | 39 |
| Compression set | DIN ISO 815-1, Method C | 24 h; 70 °C | % | 28 |
| Rebound resilience | ISO 4662 | % | 40 | |
| Tear strength | ISO 34-1 | 500 mm/min | kN/m | 208 |
| Ultimate tensile strength | DIN 53504 | 200 mm/min | MPa | 53.4 |
| ショア硬度A | DIN ISO 7619-1 | 1s | 98 | |
| ショア硬度D | DIN ISO 7619-1 | 1s | 65 | |
| 引張り破断伸び率 | DIN 53504 | 200 mm/min | % | 349 |
| 強度 （10%伸び時） | DIN 53504 | 200 mm/min | MPa | 15,8 |
| 強度 （100%伸び時） | DIN 53504 | 200 mm/min | MPa | 28,4 |
| 強度 （300%伸び時） | DIN 53504 | 200 mm/min | MPa | 37,8 |
| 強度 （50%伸び時） | DIN 53504 | 200 mm/min | MPa | 23,6 |
| 曲げ弾性率 | ISO 178 | 2 mm/min | MPa | 270 |
| 耐摩耗性 | ISO 4649 method A | mm³ | 19 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 密度 | ISO 1183-1 | kg/m³ | 1175 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
