- Coatings, paints & inks
Bayhydrol® UH 240
Aliphatic anionic polyester polyurethane dispersion. As a combination binder in the formulation of highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for use on plastics.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Non-reactive system
- Polyurethane
- Waterbased dispersion
- PU dispersion - high molecular
- PU dispersion
Material
- Coatings, paints & inks
- Low viscous, Solvent-free, Easy mixing, Flexible, Elastic, Waterborne
General Characterization
Aliphatic anionic polyester polyurethane dispersion.
As a combination binder in the formulation of highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for use on plastics.
As a combination binder in the formulation of highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for use on plastics.
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 5 - 40 °C.
- Protect fromfrost , heat and foreign material.
General information: An increase in viscosity may occur during storage. If the containers are not sealed properly, the evaporation of water will result in the formation of a film which cannot be redispersed. The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 40 °C.
- Protect from
General information: An increase in viscosity may occur during storage. If the containers are not sealed properly, the evaporation of water will result in the formation of a film which cannot be redispersed. The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Acid value | DIN EN ISO 2114 | mg KOH/g | approx. 0.5 |
| Appearance | milky, cloudy | ||
| Density at 20 °C | DIN EN ISO 2811-2 | g/ml | approx. 1.1 |
| Minimum film forming temperature (MFT) | DIN ISO 2115 | °C | < 0 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Mean particle size | photon correlation spectroscopy | nm | max. 210 |
| Non-volatile content (1 g/1 h 125 °C) | DIN EN ISO 3251 | % | 39 - 41 |
| Viscosity 23 °C, D=40s-1 | M014-ISO 3219/A.3 | mPa.s | < 150 |
| pH | DIN ISO 976 | 6 - 8 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
