i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Adhesives
- Fast bonding, Heat activated, Moisture resistant, Heat resistant, Waterborne
General Characterization
Aqueous polyurethane dispersion.
Dispercoll® U 58/1 PLUS is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for using in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make Dispercoll® U 58/1 PLUS has good storage stability, especially sustainable initial heat resistance.
Dispercoll® U 58/1 PLUS is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for using in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make Dispercoll® U 58/1 PLUS has good storage stability, especially sustainable initial heat resistance.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 15 - 25 °C.
Temperatures higher than 30 °C should be avoided.
- Protect from direct sunlight, frost, heat and foreign material.
General information: The product is sensitive to temperature below 10°C which can damage the product irreversibly. Prolonged storage at higher temperature may affect the product properties. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.
- Recommended storage temperature: 15 - 25 °C.
Temperatures higher than 30 °C should be avoided.
- Protect from direct sunlight, frost, heat and foreign material.
General information: The product is sensitive to temperature below 10°C which can damage the product irreversibly. Prolonged storage at higher temperature may affect the product properties. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| pH-value | DIN ISO 976 | 6.0 - 9.0 | |
| Viscosity at 23 °C,spindle L 2 / 30 rpm | DIN 53019 | mPa*s | ≤ 1000 |
| Non-volatile content (1g / 1h / 125 °C) | DIN EN ISO 3251 | % | 49 - 51 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com