- Adhesives
Dispercoll® S 3030/1
Dispercoll S 3030/1 is an aqueous anionic colloidal solution of amorphous silicon dioxide. Dispercoll S 3030/1 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of nano-zinc oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Nano-silica dispersion
Material
- Adhesives
- Waterborne, Heat resistant, Solvent-free, Contact adhesive
General Characterization
Dispercoll S 3030/1 is an aqueous anionic colloidal solution of amorphous silicon dioxide.
Dispercoll S 3030/1 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of nano-zinc oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
Dispercoll S 3030/1 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of nano-zinc oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
Storage Conditions
Dispercoll S 3030/1 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product is sensitive to freezing and must not be stored at temperatures below 5°C. Frozen product is irreversibly damaged. Containers must be kept sealed, otherwise the evaporation of water or contamination will result in damage to the material. Recommended storage temperature is 10º-25ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Specific surface | m^2/g | approx. 300 | |
| Density | g/cm^3 | approx. 1.21 | |
| pH | approx. 10.5 | ||
| Average particle size | nm | approx. 9 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Ignition Residue | % | 30 - 31 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
