Covestro certifies that the product meets specifications for {{storageTimeWarrantyInMonths}} from the date of shipment, provided it is stored and handled in accordance with the conditions specified in the ‘Storage’ section. After this period, product performance is not assured; Customers are responsible for retesting material before use. Covestro assumes no liability for product performance after {{storageTimeWarrantyInMonths}}.
Product description
Branched short-chain polyester polyol.As a binder for high-quality hard and weather-stable coatings and for decorative gravel.
Applications
Desmophen® VP LS 2249/1 is used as the hardening component in weather-stable polyurethane systems. The preferred polyol combinations are mixtures with, for example, Desmophen® C 1100.
Desmophen® VP LS 2249/1 is used in the formulation of hard coatings, sealing compounds and mortars for decorative gravel. The undermentioned Desmodur® grades are among the suitable co-reactants.
Form supplied
Low viscosity liquid
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Hydroxyl content | 14.5 - 16.5 | % | M023 - ISO 4629-2 | |
| Dynamic viscosity | 23 °C | 1,700 - 2,100 | mPa·s | M014 - ISO 3219/A.3 |
| Water content | ≤ 0.1 | % | M018 - DIN 51777-1 | |
| Color | Hazen | ≤ 100 | M017 - EN 1557 | |
| Color | Hazen | ≤ 100 | M017 - EN 1557 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Equivalent weight | 110 | g/mol | calculated based on OH content |
Solubility / thinnability
General speaking, Desmophen® VP LS 2249/1 has good compatibility with the solvents listed. However, the solutions formed must be tested for their storage stability.
Desmophen® VP LS 2249/1 can be thinned with esters, ketones, aromatic hydrocarbons and ether esters. Prolonged storage of solutions with a low binder content may result in turbidity and sedimentation.
Only PU grade solvents should be used (< 0.05 % water).The solvent should not contain reactive groups.
Compatibility
General speaking, Desmophen® VP LS 2249/1 has good compatibility with polyester polyols. Its compatibility with Desmodur® grades should always be tested. When mixed with Desmodur® N 3300 or with Desmodur® N 3600, Desmophen® VP LS 2249/1 shows slight incompatibility. This recedes during the course of the reaction. The product is also compatible with Desmodur® N 3200, Desmodur® N 3400 and Desmodur® XP 2838.
Storage
- Storage in original sealed Covestro container.
- Recommended storage temperature: {{storageTemperature}}
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore always be kept tightly sealed in its original containers.
Storage time
Health and Safety Information
Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, food contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
