• Thermoplastic Polyurethane

Desmopan 9392A

Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; Application; Hoses, non-reinforced; Cable sheathings; Profiles; Technical parts

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

Thermoplastic Polyurethane
Chemical resistant, Scratch resistant, Cold-flexibility, Abrasion resistant, Tear resistant, Wear resistant

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Maximum drying temperature - °C 80
射出成形-溶融温度 - °C 210 - 230
射出成形-金型温度 - °C 20 - 40
押出-溶融温度 - °C 195 - 215
Property Name Standard Test condition Unit Value
Tensile storage modulus ISO 6721-1,-4 -20 °C MPa 700
Tensile storage modulus ISO 6721-1,-4 20 °C MPa 132
Tensile storage modulus ISO 6721-1,-4 60 °C MPa 71
Torsional storage modulus ISO 6721-2 -20 °C MPa 104
Torsional storage modulus ISO 6721-2 23 °C MPa 22
Torsional storage modulus ISO 6721-2 70 °C MPa 13
Property Name Standard Test condition Unit Value
Compression set DIN ISO 815-1, Method A 24 h; 70 °C % 56
Compression set DIN ISO 815-1 72 h; 23 °C % 22
Compression set DIN ISO 815-1, Method C 24 h; 70 °C % 36
Rebound resilience ISO 4662 % 32
Tear strength ISO 34-1 500 mm/min kN/m 85
Ultimate tensile strength DIN 53504 200 mm/min MPa 50
ショア硬度A DIN ISO 7619-1 1s 92
ショア硬度D DIN ISO 7619-1 1s 42
引張り破断伸び率 DIN 53504 200 mm/min % 540
強度 (10%伸び時) DIN 53504 200 mm/min MPa 3,8
強度 (100%伸び時) DIN 53504 200 mm/min MPa 11
強度 (300%伸び時) DIN 53504 200 mm/min MPa 20
耐摩耗性 ISO 4649 method A mm³ 20
Property Name Standard Test condition Unit Value
密度 ISO 1183-1 kg/m³ 1150

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Compare