- Thermoplastic Polyurethanes
Desmopan 9385A GMP
Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; complies with VDE 0282-10; This product is manufactured under Good Manufacturing Practice (GMP defined in Regulation (EC) No. 2023/2006) and is therefore limited suitability for use with food contact. Please refer our separate certificate at http://www.tpu.covestro.com/en/Library/Certificates/Food-Contact.aspx.; Application; Cable sheathings; Hoses, non-reinforced
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Thermoplastic Polyurethanes
- Cold-flexibility, Food-contact-compliant, Soft touch, Abrasion resistant, Chemical resistant, Scratch resistant, Wear resistant, Tear resistant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 乾燥温度 | - | °C | 80 - 110 | |
| 射出成形-溶融温度 | - | °C | 205 - 225 | |
| 射出成形-金型温度 | - | °C | 20 - 40 | |
| 押出-溶融温度 | - | °C | 195 - 215 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Tensile storage modulus | ISO 6721-1,-4 | -20 °C | MPa | 118 |
| Tensile storage modulus | ISO 6721-1,-4 | 20 °C | MPa | 32 |
| Tensile storage modulus | ISO 6721-1,-4 | 60 °C | MPa | 23 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Compression set | DIN ISO 815-1, Method A | 24 h; 70 °C | % | 41 |
| Compression set | DIN ISO 815-1 | 72 h; 23 °C | % | 25 |
| Compression set | DIN ISO 815-1, Method C | 24 h; 70 °C | % | 30 |
| Rebound resilience | ISO 4662 | % | 40 | |
| Tear strength | ISO 34-1 | 500 mm/min | kN/m | 65 |
| Ultimate tensile strength | DIN 53504 | 200 mm/min | MPa | 39 |
| ショア硬度A | DIN ISO 7619-1 | 1s | 86 | |
| ショア硬度D | DIN ISO 7619-1 | 1s | 35 | |
| 引張り破断伸び率 | DIN 53504 | 200 mm/min | % | 597 |
| 強度 （10%伸び時） | DIN 53504 | 200 mm/min | MPa | 2,0 |
| 強度 （100%伸び時） | DIN 53504 | 200 mm/min | MPa | 6,8 |
| 強度 （300%伸び時） | DIN 53504 | 200 mm/min | MPa | 12,2 |
| 強度 （50%伸び時） | DIN 53504 | 200 mm/min | MPa | 5,3 |
| 耐摩耗性 | ISO 4649 method A | mm³ | 25 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| MVR | ISO 1133 | 190 °C/ 21.6 kg | cm³/10 min | 4560 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 密度 | ISO 1183-1 | kg/m³ | 1120 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
