- Thermoplastic Polyurethane
Desmopan 3860D / CQ3860D MBC091
injection molding grade; modified with ABS; good low-temperature flexibility; good wear resistance; Application; Ski boot shells; Injection molded engineering parts
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Thermoplastic Polyurethane
- Abrasion resistant, Chemical resistant, Scratch resistant, Wear resistant, Tear resistant, Weather resistant, Cold-flexibility
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 乾燥温度 | - | °C | 100 - 110 | |
| 射出成形-溶融温度 | - | °C | 235 - 245 | |
| 射出成形-金型温度 | - | °C | 40 - 50 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Tensile storage modulus | ISO 6721-1,-4 | -20 °C | MPa | 1750 |
| Tensile storage modulus | ISO 6721-1,-4 | 20 °C | MPa | 500 |
| Tensile storage modulus | ISO 6721-1,-4 | 60 °C | MPa | 160 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Rebound resilience | ISO 4662 | % | 42 | |
| Ultimate tensile strength | DIN 53504 | 200 mm/min | MPa | 52 |
| ショア硬度D | DIN ISO 7619-1 | 1s | 59 | |
| 引張り破断伸び率 | DIN 53504 | 200 mm/min | % | 430 |
| 強度 （10%伸び時） | DIN 53504 | 200 mm/min | MPa | 13 |
| 強度 （100%伸び時） | DIN 53504 | 200 mm/min | MPa | 25 |
| 強度 （300%伸び時） | DIN 53504 | 200 mm/min | MPa | 44 |
| 曲げ弾性率 | ISO 178 | 2 mm/min | MPa | 230 |
| 耐摩耗性 | ISO 4649 method A | mm³ | 35 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 密度 | ISO 1183-1 | kg/m³ | 1200 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
