- Adhesives
Desmodur® RC
Solution of a polyisocyanurate of toluene diisocyanate (TDI) in ethyl acetate.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PIC
- Aromatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Polyisocyanurate
- TDI
- Isocyanate
- Reactive system
Material
- Adhesives
- Moisture resistant, Solventborne, Heat activated, Contact adhesive
General Characterization
Solution of a polyisocyanurate of toluene diisocyanate (TDI) in ethyl acetate.
Desmodur® RC is suitable for crosslinking adhesives based on Desmocoll®, natural or synthetic rubber, especially pale-coloured adhesives used to bond rubber materials.
Desmodur® RC is suitable for crosslinking adhesives based on Desmocoll®, natural or synthetic rubber, especially pale-coloured adhesives used to bond rubber materials.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is highly sensitive to moisture and react with water to form carbon dioxide and insoluble ureas. The containers must therefore be kept tightly sealed. The ingress of water in any form (damp containers, anhydrous solvents, moist air) must be prevented as otherwise the formation of carbon dioxide may cause a dangerous increase in pressure in the containers. Exposure to air and/or light accelerates yellowing but this has no effect on the processing properties in general.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is highly sensitive to moisture and react with water to form carbon dioxide and insoluble ureas. The containers must therefore be kept tightly sealed. The ingress of water in any form (damp containers, anhydrous solvents, moist air) must be prevented as otherwise the formation of carbon dioxide may cause a dangerous increase in pressure in the containers. Exposure to air and/or light accelerates yellowing but this has no effect on the processing properties in general.
Sampling
No data available
Packaging Type
Metal containers: 1 litre bottle containing 0.8 kg, can containing 50 kg
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Solvent | Ethyl acetate | ||
| Flash point | DIN 51 755 | °C | - 4 |
| Density at 20 °C | DIN 53 217/5 | g/cm3 | approx. 1.01 |
| Viscosity at 20 °C | DIN 53 015 | mPa*s | approx. 3 |
| Solids content | % | approx. 35 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO content | M105-ISO 11909 | % | 7.0 ± 0.2 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
