- Coatings, paints & inks
Bayhydrol® UV 2282
Waterborne, UV-curing Polyurethane Dispersion. In the formulation of physically drying, waterborne UV-curing wood and plastic coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- UV-curing dispersion
- Polyurethane
- Waterbased dispersion
- Reactive system
Material
- Coatings, paints & inks
- Fast curing, Waterborne
General Characterization
Waterborne, UV-curing Polyurethane Dispersion.
In the formulation of physically drying, waterborne UV-curing wood and plastic coatings.
In the formulation of physically drying, waterborne UV-curing wood and plastic coatings.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect from intense radiation (ligth, UV), frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in an increase of average particle size, risk of sedimentation, risk of pH-drift and ultimately coagulation. Even though the product is stabilized by a biocide, contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 30 °C.
- Protect from intense radiation (ligth, UV), frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in an increase of average particle size, risk of sedimentation, risk of pH-drift and ultimately coagulation. Even though the product is stabilized by a biocide, contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Appearance | milky, slightly colloidal | ||
Density at 20 °C | DIN EN ISO 2811-2 | g/ml | approx. 1.06 |
Minimum film forming temperature (MFT) | DIN ISO 2115 | °C | 0 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Viscosity 23 °C, D=40s-1 | M014-ISO 3219/A.3 | mPa.s | < 800 |
pH | DIN ISO 976 | 7.75 ± 0.75 | |
Non-volatile content (1 g/1 h 125 °C) | DIN EN ISO 3251 | % | 39 ± 1 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com