- Coatings, paints & inks
Bayhydrol® UV 2282
Waterborne, UV-curing Polyurethane Dispersion.In the formulation of physically drying, waterborne UV-curing wood and plastic coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Reactive system
- Waterbased dispersion
- UV-curing dispersion
- Polyurethane
Material
- Coatings, paints & inks
- Waterborne, Fast curing
General Characterization
Waterborne, UV-curing Polyurethane Dispersion.
In the formulation of physically drying, waterborne UV-curing wood and plastic coatings.
In the formulation of physically drying, waterborne UV-curing wood and plastic coatings.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect from intense radiation (ligth, UV), frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in an increase of average particle size, risk of sedimentation, risk of pH-drift and ultimately coagulation. Even though the product is stabilized by a biocide, contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 30 °C.
- Protect from intense radiation (ligth, UV), frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage at higher temperatures may result in an increase of average particle size, risk of sedimentation, risk of pH-drift and ultimately coagulation. Even though the product is stabilized by a biocide, contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Appearance | milky, slightly colloidal | ||
| Minimum film forming temperature (MFT) | DIN ISO 2115 | °C | 0 |
| Density at 20 °C | DIN EN ISO 2811-2 | g/ml | approx. 1.06 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Non-volatile content (1 g/1 h 125 °C) | DIN EN ISO 3251 | % | 39 ± 1 |
| pH | DIN ISO 976 | 7.75 ± 0.75 | |
| Viscosity at 23 °C,(D = 40 s^-1) | DIN EN ISO 3219/A.3 | mPa∙s | < 800 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
