Bayfill® 800U

Bayfill 800U system is designed for backfilling flexible TPE and PVC slush molded skins.Bayfill 800U Component B is reacted with Bayfill 400 Component A to produce instrument panels, center consoles and other protective padding for the automotive industry. As with any product, use of Bayfill 800U system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability for use.

Avoid moisture contamination during storage, handling and processing. For both components, pad containers with either nitrogen or dry air (desiccant cartridge or air dryer at -40°F dew point). Store polyol component from 64°F to 86°F. Mix polyol component to a homogenous state before use and before removing any material from container. For optimum shelf life, the recommended storage temperature for the isocyanate component is 64°F to 86°F. Do not expose isocyanate component to lower temperatures – material becomes viscous, freezing may occur.

Shelf life is 6 months if stored in factory sealed containers.

* These values provide general information and are not part of the product specification.

Mix Polyol Component B before use and before removing any material from container. Cycle time depends on part thickness and mold temperature. Use a high-quality, properly applied release agent to prevent cured foam from sticking to mold surfaces. Protect Isocyanate Component A from moisture. **These are values that can be modified to optimize the production process.