Submit
uralac-ultra-domestic-powder-coating-applications-header
Story

Powder-coating technologies for heat-sensitive substrates

Demand is growing for MDF and other engineered woods in furniture and interior architecture. But it has traditionally been difficult to powder-coat these substrates because of the high curing temperatures needed. Thanks to their lower curing temperatures, solutions like our Uralac® technologies make this possible!
Contact Expert Request a sample Request a quote

The curing-temperature challenge

With its smooth surface – ideal for painting – and attractive price point compared to solid wood, it’s no surprise that MDF and similar engineered woods are increasingly popular choices for furniture and interior architecture.

Finishings for these heat-sensitive substrates (HSS) have traditionally involved liquid paint. But many manufacturers have long been interested in using powder coating instead, given benefits like strength, reliability, cost-efficiency, and greater aesthetic possibilities.

However, powder coatings have typically required temperatures of over 150°C to cure and melt onto the substrate’s surface. This can cause heat-sensitive substrates to crack, bubble, and pop as their fibers warp and rise up in the heat.

Let Uralac® give you that competitive advantage

Low-temperature curing
Powder-coating technologies for HSS cure at temperatures far below 160° – so they won’t warp or damage wood.
Reduced environmental impact
The lower curing temperatures of these powder-coating technologies also mean reduced energy consumption.  
Single-layer curing
Several of our powder-coating technologies for HSS can be cured in a single layer, making application easier and more efficient.

Bringing the power of powder to heat-sensitive substrates

Now, with powder coating technologies like Uralac® Ultra, Engain , and UV, it’s much easier to produce and apply powder coatings on heat-sensitive substrates.

Uralac® Ultra and Uralac® UV are innovative coating technologies consisting of unsaturated polyester, a co-crosslinker, and a thermal initiator.

Most importantly, they can be applied in a unique single-layer process at temperatures as low as 120 – 130°C (for Uralac® Ultra), or even under 100°C (for Uralac® UV), rather than the traditional 160 – 170°C.

This lower curing temperature opens a whole new world of possibilities for powder coating on MDF and engineered wood. Plus, it also reduces the environmental impact of these coatings – for instance, Uralac® Ultra has a carbon footprint five times lower than traditional coating systems.

Solution_Center_Contact_Form_Image

Are you ready to go from status quo to Status Next?

Meet your inventive companion for hands-on coatings and adhesives solutions

Discover more

Contact us

Contact Partner

오늘 문의해주신 주제는 무엇입니까?

자신을 어떻게 설명하시겠습니까?

귀하는 어떤 유형의 자료에 관심이 있으십니까?

귀하는 어떤 유형의 산업에 관심이 있으십니까?

이것은 어떤 유형의 조회입니까?

귀하에게 연락할 수 있는 방법은 무엇입니까?

요청 주제는 무엇입니까

우리에게 보내는 메시지

*필수 필드

데이터 처리에 대한 자세한 내용은 개인정보 처 리방침에 서 확인할 수 있습니다.

Request a sample
{"FieldName":"ProductName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispim/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&CLIENTID=DHLTHP&CLIENTSECRET=2DNknMSM9HF5ubP2qdBg&extended=true","Language":"ko","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":5}

Request a quote
{"FieldName":"ProductName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispim/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&CLIENTID=DHLTHP&CLIENTSECRET=2DNknMSM9HF5ubP2qdBg&extended=true","Language":"ko","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":5}

Compare