- Coatings, paints & inks
Desmophen® VP LS 2388
Flexibilising OH-bearing PES combinable Desmodur® N for 2K PU for plastics and industrial coatings. Resistance to accelerated and outdoor weathering, high film elasticity and good tar resistance.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polyester resin
Material
- Coatings, paints & inks
- Solventborne, Flexible, Elastic, Weather resistant
General Characterization
Flexibilising hydroxyl-bearing polyester.
As a co-reactant, primarily with Desmodur® N/ultra N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor weathering, high film elasticity and good tar resistance; also in the flexibilisation of hard coatings, e.g. in industrial applications.
As a co-reactant, primarily with Desmodur® N/ultra N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor weathering, high film elasticity and good tar resistance; also in the flexibilisation of hard coatings, e.g. in industrial applications.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture , heat and foreign material.
General information:The product is somewhat hygroscopic. The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity.
- Recommended storage temperature: 0 - 30 °C.
-
General information:The product is somewhat hygroscopic. The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Flash point | DIN 53 213 | °C | approx. 34 |
Equivalent weight | approx. 450 | ||
Density at 20 °C | DIN 53 217 | g/cm3 | approx. 1.1 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
OH content | DIN EN ISO 4629-2 | % | 3.8 ± 0.3 |
Non-volatile content (1 g, 1 h, 125 °C) | DIN EN ISO 3251 | % | 80 ± 2 |
Acid value | DIN EN ISO 2114 | mg KOH/g | < 3.0 |
Viscosity at 23 °C | DIN EN ISO 3219/A.3 | mPa*s | 3,000 ± 500 |
Hazen color value | DIN EN 1557 | < 100 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com