- Thermoplastic Polyurethanes
Desmopan 3856D
injection molding grade; modified with ABS; good low-temperature flexibility; good wear resistance; Application; Ski boot shells; Injection molded engineering parts
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Thermoplastic Polyurethanes
- Cold-flexibility, Abrasion resistant, Chemical resistant, Scratch resistant, Wear resistant, Tear resistant, Weather resistant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 乾燥温度 | - | °C | 100 - 110 | |
| 射出成形-溶融温度 | - | °C | 235 - 245 | |
| 射出成形-金型温度 | - | °C | 40 - 50 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Tensile storage modulus | ISO 6721-1,-4 | -20 °C | MPa | 1380 |
| Tensile storage modulus | ISO 6721-1,-4 | 20 °C | MPa | 310 |
| Tensile storage modulus | ISO 6721-1,-4 | 60 °C | MPa | 110 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Rebound resilience | ISO 4662 | % | 40 | |
| Ultimate tensile strength | DIN 53504 | 200 mm/min | MPa | 51 |
| ショア硬度D | DIN ISO 7619-1 | 1s | 55 | |
| 引張り破断伸び率 | DIN 53504 | 200 mm/min | % | 450 |
| 強度 （10%伸び時） | DIN 53504 | 200 mm/min | MPa | 8 |
| 強度 （100%伸び時） | DIN 53504 | 200 mm/min | MPa | 20 |
| 強度 （300%伸び時） | DIN 53504 | 200 mm/min | MPa | 35 |
| 曲げ弾性率 | ISO 178 | 2 mm/min | MPa | 150 |
| 耐摩耗性 | ISO 4649 method A | mm³ | 30 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 密度 | ISO 1183-1 | kg/m³ | 1200 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
