Desmodur® PF
Desmodur® PF is a modified diphenyl-methane-4,4'-diisocyanate (MDI).
i
Market Switch
Selection will influence the results you get.
About
Product Types
- MDI
Material
No data available
General Characterization
Desmodur® PF is a modified diphenyl-methane-4,4'-diisocyanate (MDI).
Desmodur® PF is a modified diisocyanate that is liquid at room temperature and is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives.
Desmodur® PF is a modified diisocyanate that is liquid at room temperature and is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 20 - 25 °C.
- Protect from moisture , heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Prolonged storage at temperatures above 25 °C results in a deterioration in quality as the product becomes increasingly turbid owing to the formation of a sediment (dimers) that is not readily soluble. For example, storage stability at 40 °C is limited to a maximum of 4 months. Storage at too low temperature results in crystallisation which starts at temperatures below 20 °C.
To prevent crystallisation, it must be ensured that the product does not cool to below 20 °C. The product should be checked for crystallisation on delivery. If crystallisation has occurred during transportation, the prodcut should be returned immediately.
- Recommended storage temperature: 20 - 25 °C.
-
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Prolonged storage at temperatures above 25 °C results in a deterioration in quality as the product becomes increasingly turbid owing to the formation of a sediment (dimers) that is not readily soluble. For example, storage stability at 40 °C is limited to a maximum of 4 months. Storage at too low temperature results in crystallisation which starts at temperatures below 20 °C.
To prevent crystallisation, it must be ensured that the product does not cool to below 20 °C. The product should be checked for crystallisation on delivery. If crystallisation has occurred during transportation, the prodcut should be returned immediately.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Phenyl isocyanate content | MDI-01-09 | mg/kg | max. 10 |
| Density 25 °C | DIN 51 757 | g/cm3 | approx. 1.21 |
| Vapor pressure at 20 °C (MDI) | hPa | < 10^-5 | |
| Solidification temperature | °C | < 20 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity 25 °C | MDI-01-02 | mPa*s | 600 ± 100 |
| NCO | MDI-01-01 | % | 23.0 ± 0.5 |
| Hydrolysable chlorine (Cl) | MDI-01-04 | mg/kg | max. 50 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
