Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Product description
Blocked aliphatic polyisocyanate based on IPDI.In combination with OH-functional polyols, preferably Desmophen® T-grade OH-functional polyesters, in the formulation of lightfast, one-component polyurethane baking coatings, especially in coil and can coating applications, and as an additive to conventional baking systems to improve adhesion and elasticity. Crosslinking agent certified for use in food contact applications*) for the production of packaging coatings for the food industry.
Applications
Desmodur® BL 2078/2 was developed as a hardener for the formulation of lightfast, one-component polyurethane baking coatings and is used primarily in coil and can coating applications.With equivalent crosslinking (BNCO:OH = 1.0:1.0) with Desmophen® T 1775, corrosion-resistant coil coating primers and weather-stable coil coating topcoats with balanced hardness and elasticity properties can be formulated. The required baking temperature (PMT = peak metal temperature) can be lowered by catalysis with 0.5 – 1.0 % dibutyltin dilaurate (DBTL) without affecting the storage stability of the finished coating. With a PMT of 232 °C, both primer and topcoat can be applied with a dry film thickness of up to 50 µm, so that the total thickness of a two-coat system can be as much as 100 µm.The product can be used in combination with OH-functional polyesters such as Desmophen® T 1775 and phenolic, melamine and benzoguanamine resins for the formulation of highly flexible and sterilization-resistant can coatings that cure at 200 °C within 12 minutes. For the formulation of packaging coatings that are also suitable for food contact applications, we recommend a mixed system of Desmophen® T 1775 / SFC 112 / Cymel® 1123 / Desmodur® BL 2078/2 in the ratio 50 : 20 : 25 : 5 % by wt.
Form supplied
approx. 60 % in Solvesso® 100
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Non-volatile content | (0.2 g/60 min/140 °C) | 60 ± 2 | % | DIN EN ISO 3251 |
| Viscosity | at 23 °C | 1,750 ± 500 | mPa*s | DIN EN ISO 3219/A.3 |
| Hazen color value | ≤ 100 | DIN EN 1557 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| NCO content | , blocked | approx. 7 | % | |
| Equivalent weight | approx. 600 | |||
| Flash point | 49 | °C | DIN EN ISO 13736 | |
| Density | at 20 °C | 1,04 | g/cm3 | DIN EN ISO 2811 |
Solubility / thinnability
Desmodur® BL 2078/2 can be thinned to a solids content of 35 % by wt. with esters, ketones, ether esters, ether alcohols, aromatic hydrocarbons and mixtures thereof such as Solvesso® 100, 150 ND and 200 ND. The product cannot be thinned with aliphatic hydrocarbons. The compatibility and storage stability of the thinned solutions should always be tested.
Compatibility
Desmodur® BL 2078/2 is generally compatible with OH-functional polyols, preferably Desmophen® T-grade OH-functional polyesters, melamine resins such as Maprenal® MF 904, MF 915, Cymel® 202, 325, 327, benzoguanamine resins such as Cymel® 1123, phenolic resins such as SFC 112 and mixtures thereof. The compatibility of the desired mixtures should be tested, however.
Storage
- Storage in original sealed Covestro container. - Recommended storage temperature: 0 - 30 °C. - Protect from moisture, frost, heat and foreign material. General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Storage time
Covestro represents that, for a period of six months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately.The lapse of the six months period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the six months period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the six months period.
Health and Safety Information
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Conditional Use in Regulated Applications
This product may be suitable for use in food contact. However, use in such applications requires prior written approval from Covestro. Legal requirements for such applications vary by country and jurisdiction, and the customer is solely responsible for verifying compliance with all applicable laws and regulations. Without Covestro’s written approval, the product may not be distributed or used for regulated purposes, and Covestro disclaims all liability for such use.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
