Baypreg® F 315
two-component polyurethane system; very high flexural stiffness and excellent thermal properties; flexural strength 7 MPa @ 22°C
i
Market Switch
Selection will influence the results you get.
About
Product Types
- System
Material
No data available
General Characterization
Baypreg F 315 system is a two component polyurethane system used in compression molding. Baypreg F 315 is specially formulated to be processed without the need for carbon dioxide injection.
Storage Conditions
The isocyanate, Component A (MDI isocyanate) should be stored in tightly closed containers and protected from contamination with moisture and foreign materials, which can adversely affect processing. It will react slowly with water to form polyureas and liberate carbon dioxide gas, which may cause sealed containers to expand and rupture. Storage temperature should be maintained between 10° and 30°C (50° and 86°F).
The polyol blend, Component B, is hygroscopic and should be protected from atmospheric moisture by sealing the container, or blanketing the product with a dry atmosphere. Component B is not phase stable and needs mixed thoroughly before and during use. Contamination with foreign materials, which can adversely affect processing, should be avoided. Materials should be stored at normal room temperature (18° to 30°C).
The polyol blend, Component B, is hygroscopic and should be protected from atmospheric moisture by sealing the container, or blanketing the product with a dry atmosphere. Component B is not phase stable and needs mixed thoroughly before and during use. Contamination with foreign materials, which can adversely affect processing, should be avoided. Materials should be stored at normal room temperature (18° to 30°C).
Sampling
No data available
Packaging Type
No data available
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
