Bayhydrol® UO 1711
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Modified waterborne polyurethane dispersion
Specifically suit for non-polar surface, e.g. PE, PP substrates. Provide direct adhesion to non-polar surfaces without pre-treatments, such as primer, flame, plasma, etc.
Could be used as one component
Specifically suit for non-polar surface, e.g. PE, PP substrates. Provide direct adhesion to non-polar surfaces without pre-treatments, such as primer, flame, plasma, etc.
Could be used as one component
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 5 - 23 °C, temperatures higher than 30 °C should be avoided
- Protect from frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Prolonged storage at higher temperatures may affect the product properties and possibly resulting in sedimentation or coagulation. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 23 °C, temperatures higher than 30 °C should be avoided
- Protect from frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Prolonged storage at higher temperatures may affect the product properties and possibly resulting in sedimentation or coagulation. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.Contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Minimum film-forming temperature | DIN ISO 2115 | °C | < 5 |
| Density at 20 °C | DIN EN ISO 2811/3 | g/ml | approx. 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| These characteristic data are tentative values | |||
| Viscosity at 23°C spindle L1/30 rpm | M092-ISO 2555 | mPa.s | < 200 |
| Non-volatile content (1g / 1h / 125 °C, convection oven) | DIN EN ISO 3251 | % | 33 - 38 |
| pH-value (20°C, supply form) | DIN ISO 976 | 6.0 - 9.0 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
