- Coatings, paints & inks
- Foams
Bayhydrol® A 2770
Aqueous hydroxyfunctional polyacrylic dispersion, in combination with aliphatic polyisocyanates for waterborne 2K-polyurethane coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Acrylate dispersion
Material
- Foams
- Flexible
- Coatings, paints & inks
- Elastic, Hard, Waterborne
General Characterization
Aqueous hydroxyfunctional polyacrylic dispersion, in combination with aliphatic polyisocyanates for waterborne 2K-polyurethane coatings.
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: > 0 ≤ 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10 % solution of dimethyl ethanol amine.
Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: > 0 ≤ 30 °C.
- Protect from frost, heat and foreign material.
General information: Short-time cooling down to -18 °C does not typically damage the product. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation.
The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10 % solution of dimethyl ethanol amine.
Contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Alternative carbon share ^1 bio-based, calculation without water content | calculated | % | approx. 15 |
| Alternative raw material share ^1 bio-based, calculation without water content | calculated | wt.-% | approx. 11 |
| OH % on solid | calculated | % | approx. 3.9 |
| Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.06 |
| Acid value | DIN EN ISO 2114 | mg KOH/g | approx. 11 |
| ^1 not originating from primary fossil sources |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C, D = approx. 40 s^-1 | DIN EN ISO 3219/A.3 | mPa*s | ≤ 1,200 |
| pH-value | DIN ISO 976 | 7 - 9 | |
| Non-volatile content (1 g/1 h/125 °C/circulating air oven) | DIN EN ISO 3251 | % | 42 - 46 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
