Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Product description
Applications
BAYFIT® 15108/AO is a polyol formulation intended for processing with isocyanates to produce viscoelastic molded polyurethane foam. It is generally processed in combination with DESMODUR® M-86 or DESMODUR D5378.
Sampling
The product must be thoroughly homogenized before processing and moisture access must be prevented.
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Density at 23°C | approx. 1,025 | g/cm3 | LPUR - 050 | |
| Water content | 2,58 ± 0,14 | % | LPUR - 001 | |
| Hydroxyl number | 94 ± 5 | mg KOH/g | LPUR - 007 | |
| Viscosity at 25 °C | 862 ± 212 | mPa.S | LPUR - 002 |
Storage
Containers should be protected against strong sunlight and always kept sealed to protect the contents from moisture or damp air.Shelf life from date of delivery: 3 months.Storage temperature: 15-30 °C.
Processing
TESTING RESULTS (LABORATORY CONDITIONS):BAYFIT® 15108/AO has been mixed at approx. 4800 turns/min for approx. 8 s at approx. 23 °C with the respective DESMODUR®, at the following ratio:100 p. p. BAYFIT® 15108/AO 46 p. p. DESMODUR® M-86 (index 70)Cream time (laboratory): approx. 13 sGel time (laboratory): approx. 76 sRise time (laboratory): approx. 136 sFree rise density (laboratory): approx. 50 kg/m3PROCESSING CONDITIONS:Recommended raw material temperature: 20-25 °CRecommended mixing ratio: 100:56 to 100:66Recommended mold temperature: 50-55 °CRecommended demold time: 8-10 min.Recommended moldded density: 55-60 kg/m3This product has a strong tendency to phase separate hence it should be homogenized before processing and should be stirred in the day tank continuously during processing.
Health and Safety Information
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, food contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
