Submit
  • Plastics

Makrolon® Rx1805

MVR (300 °C/1.2 kg) 6.0 cm³/10 min; medical devices; high lipid resistance; suitable for sterilization with high-energy radiation; biocompatible according to many ISO 10993-1 test requirements; high viscosity; transparent parts for medical devices

Contact expert Request a sample Request a quote
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

  • Polycarbonate

Material

Plastics
Medical, Transparent, Chemical resistant

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Barrel Temperatures - Front - °C 290 - 300
Barrel Temperatures - Middle - °C 280 - 290
Barrel Temperatures - Nozzle - °C 300 - 310
Barrel Temperatures - Rear - °C 260 - 270
Dry Air Drying Temperature - °C 120
Dry Air Drying Time - h 2 - 3
Hold Pressure (% of injection pressure) - % 50 - 75
Melt temperatures - °C 290 - 330
Moisture Content max. (%) - % <= 0,02
Mold Temperatures - °C 80 - 120
Peripheral Screw Speed - m/s 0.05 - 0.2
Plastic Back Pressure (specific) - bar 50 - 150
Shot-to-Cylinder Size - % 30 - 70
Standard Melt temperature - °C 310
Vent Depth - mm 0.025 - 0.075
Property Name Standard Test condition Unit Value
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Flash ignition temperature ASTM D1929 °C 480
Glass transition temperature ISO 11357-1,-2 10 °C/min °C 145
Oxygen index ISO 4589-2 Method A % 27
Resistance to heat (ball pressure test) IEC 60695-10-2 °C 135
Self ignition temperature ASTM D1929 °C 550
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 138
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 126
Thermal conductivity, through-plane ISO 8302 23 °C; 50 % r. h. W/(m*K) 0.2
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 145
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 144
Property Name Standard Test condition Unit Value
Ball indentation hardness ISO 2039-1 N/mm² 114
Charpy impact strength ISO 179/1eU -30 °C kJ/m² N
Charpy impact strength ISO 179/1eU -60 °C kJ/m² N
Charpy impact strength ISO 179/1eU 23 °C kJ/m² N
Charpy notched impact strength ISO 21305/based on ISO 179/1eA -30 °C/ 3 mm kJ/m² 16C
Charpy notched impact strength ISO 21305/based on ISO 179/1eA 23 °C/ 3 mm kJ/m² 80P
Flexural modulus ISO 178 2 mm/min MPa 2400
Flexural strain at flexural strength ISO 178 2 mm/min % 7.1
Flexural strength ISO 178 2 mm/min MPa 98
Flexural stress at 3.5 % strain ISO 178 2 mm/min MPa 73
Izod notched impact strength ISO 21305/based on ISO 180/A 23 °C/ 3 mm kJ/m² 70P
Izod notched impact strength ISO 21305/based on ISO 180/A -30 °C/ 3 mm kJ/m² 15C
Nominal strain at break ISO 527-1,-2 50 mm/min % > 50
Puncture energy ISO 6603-2 -30 °C J 70
Puncture energy ISO 6603-2 23 °C J 65
Puncture impact properties - maximum force ISO 6603-2 -30 °C N 6600
Puncture impact properties - maximum force ISO 6603-2 23 °C N 5700
Strain at break b.o. ISO 527-1,-2 50 mm/min % 130
Stress at break ISO 527-1,-2 50 mm/min MPa 75
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2400
Yield strain ISO 527-1,-2 50 mm/min % 6.3
Yield stress ISO 527-1,-2 50 mm/min MPa 67
Property Name Standard Test condition Unit Value
Melt mass-flow rate ISO 1133 300 °C/ 1.2 kg g/10 min 6.5
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 6
Molding shrinkage, normal ISO 294-4 60x60x2 mm³/ 500 bar % 0.7
Molding shrinkage, parallel ISO 294-4 60x60x2 mm³/ 500 bar % 0.7
Molding shrinkage, parallel/normal b.o. ISO 2577 Value range based on general practical experience % 0.6 - 0.8
Property Name Standard Test condition Unit Value
Injection molding - Injection velocity ISO 294 mm/s 200
Injection molding - Melt temperature ISO 294 °C 300
Injection molding - Mold temperature ISO 294 °C 80
Property Name Standard Test condition Unit Value
Bulk density ISO 60 Pellets kg/m³ 660
Density ISO 1183-1 kg/m³ 1200
Water absorption (equilibrium value) ISO 62 23 °C; 50 % r. h. % 0.12
Water absorption (saturation value) ISO 62 Water at 23 °C % 0.3

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Stress-Strain Makrolon® Rx1805 (Multipoint Data Sheet) Spannung-Dehnung Makrolon® Rx1805 (Multipoint Data Sheet)
Viscosity Shear Rate Makrolon® Rx1805 (Multipoint Data Sheet) Viskosität Schergeschwindigkeit Makrolon® Rx1805 (Multipoint Data Sheet)
Spezifisches Volumen-Temperatur (pvT) Makrolon® Rx1805 (Multipoint Data Sheet) Specific Volume-Temperature (pvT) Makrolon® Rx1805 (Multipoint Data Sheet)
Secant modulus - Strain Makrolon® Rx1805 (Multipoint Data Sheet) Sekantenmodul-Dehnung Makrolon® Rx1805 (Multipoint Data Sheet)

Do you want to know more about Makrolon® Rx1805?
Get in touch with our experts!

How can we contact you?

{"FieldName":"","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"pt","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}
Request a sample
formVersion
{"FieldName":"productName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"pt","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}

Request a sample

Hello! Thanks for reaching out to us.
We have received your request and one of our experts will be in touch with you as soon as possible.
In the meantime, feel free to discover our innovative material solutions!

Speak to you soon,
Your Covestro Team

Request a quote
formVersion
{"FieldName":"productName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"pt","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}

Request a quote

Hello! Thanks for reaching out to us.
We have received your request and one of our experts will be in touch with you as soon as possible.
In the meantime, feel free to discover our innovative material solutions!

Speak to you soon,
Your Covestro Team

Compare