Desmopan CQ33060DUEC DPS300
injection molding grade; Partially based on renewable raw materials; with special UV stabilizers; hydrolysis-stabilised
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Injection molding - Melt temperature | - | °C | 205 - 225 | |
| Injection molding - Mold temperature | - | °C | 20 - 40 | |
| Maximum drying temperature | - | °C | 110 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Abrasion resistance | ISO 4649 method B | mm³ | 50 | |
| shore hardness D | DIN ISO 7619-1 | 1s | 63 | |
| Strain at break | DIN 53504 | 200 mm/min | % | 385 |
| Stress at 100 % strain | DIN 53504 | 200 mm/min | MPa | 21 |
| Stress at 300 % strain | DIN 53504 | 200 mm/min | MPa | 40 |
| Tear strength | ISO 34-1 | 500 mm/min | kN/m | 220 |
| Ultimate tensile strength | DIN 53504 | 200 mm/min | MPa | 48 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Density | ISO 1183-1 | kg/m³ | 1278 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
