Covestro represents that, for a period of 6 months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in chapter "Specification" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under chapter "storage" above and is otherwise handled appropriately. The lapse of the 6 months period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the 6 months period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 6 months period.
Applications
The product combines excellent printability, excellent adhesion with good chemical and physical resistances. NeoCryl® A-1125 can be used as a sole binder but the main application is as a print modifier for acrylic dispersions.
Form supplied
Form supplied is approximately 19.5% in water.
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Non-volatile content | 19.0 - 20.0 | % | GAP0001 | |
| Dynamic viscosity | LV, 2/60, 25°C | 200 - 1,000 | mPa·s | GAP0020 |
| pH-value | 8.2 - 8.6 | GAP0016 | ||
| Appearance | Yellowish | GAP0059 |
Solubility / thinnability
NeoCryl® A-1125 can be thinned with water.
Storage
The resin should be stored indoors in original, unopened and undamaged container in a dry place at storage temperature between 5-40° C. Exposure to direct sunlight should be avoided.
