- Plastics
Makrolon® XT5010
MVR (300 °C/1.2 kg) 34 cm³/10 min; easy processing; low viscosity; easy release; Vicat softening temperature 50 N, 50 °C/h = 110 °C; LCD tv frame
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polycarbonate
Material
- Plastics
- Transparent
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Burning behavior UL 94 [UL recognition] | UL 94 | 0.75-3.0 mm | Class | V-2 |
Glow wire test (GWFI) [UL recognition] | IEC 60695-2-12 | 1.5 mm | °C | 960 |
Glow wire test (GWFI) [UL recognition] | IEC 60695-2-12 | 3.0 mm | °C | 960 |
Glow wire test (GWFI) [UL recognition] | IEC 60695-2-12 | 0.75 mm | °C | 960 |
Glow wire test (GWIT) [UL recognition] | IEC 60695-2-13 | 1.5 mm | °C | 825 |
Glow wire test (GWIT) [UL recognition] | IEC 60695-2-13 | 3.0 mm | °C | 850 |
Glow wire test (GWIT) [UL recognition] | IEC 60695-2-13 | 0.75 mm | °C | 800 |
Relative temperature index (Electric strength) [UL recognition] | UL 746B | 1.5 mm | °C | 80 |
Relative temperature index (Tensile impact strength) [UL recognition] | UL 746B | 1.5 mm | °C | 80 |
Relative temperature index (Tensile strength) [UL recognition] | UL 746B | 1.5 mm | °C | 80 |
Vicat softening temperature | ISO 306 | 50 N; 120 °C/h | °C | 114 |
Vicat softening temperature | ISO 306 | 50 N; 50 °C/h | °C | 112 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Charpy impact strength | ISO 179/1eU | 23 °C | kJ/m² | 220C |
Nominal strain at break | ISO 527-1,-2 | 50 mm/min | % | > 50 |
Strain at break | b.o. ISO 527-1,-2 | 50 mm/min | % | 90 |
Stress at break | ISO 527-1,-2 | 50 mm/min | MPa | 60 |
Tensile modulus | ISO 527-1,-2 | 1 mm/min | MPa | 2700 |
Yield strain | ISO 527-1,-2 | 50 mm/min | % | 5 |
Yield stress | ISO 527-1,-2 | 50 mm/min | MPa | 75 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Melt volume-flow rate | ISO 1133 | 300 °C/ 1.2 kg | cm³/10 min | 34 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Injection molding - Injection velocity | ISO 294 | mm/s | 200 | |
Injection molding - Melt temperature | ISO 294 | °C | 260 | |
Injection molding - Mold temperature | ISO 294 | °C | 80 |
Property Name | Standard | Test condition | Unit | Value |
---|---|---|---|---|
Density | ISO 1183-1 | kg/m³ | 1210 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com