- Plastics
Makrolon® FR7087
MVR (300 °C/1.2 kg) 12 cm³/10 min; flame retardant; UL 94V-0/2.2 mm and 5VA/3.0 mm; medium viscosity; UV stabilized; easy release; electrical/electronic
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polycarbonate
Material
- Plastics
- Clear, UV stable, Transparent, Flame retardant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Barrel Temperatures - Front | - | °C | 285 - 305 | |
| Barrel Temperatures - Middle | - | °C | 270 - 290 | |
| Barrel Temperatures - Nozzle | - | °C | 270 - 305 | |
| Barrel Temperatures - Rear | - | °C | 250 - 270 | |
| Dry Air Drying Temperature | - | °C | 90 | |
| Dry Air Drying Time | - | h | 4 | |
| Hold Pressure (% of injection pressure) | - | % | 50 - 75 | |
| Melt temperatures | - | °C | 280 - 320 | |
| Moisture Content max. (%) | - | % | <= 0.02 | |
| Mold Temperatures | - | °C | 70 - 110 | |
| Peripheral Screw Speed | - | m/s | 0.05 - 0.2 | |
| Plastic Back Pressure (specific) | - | bar | 100 - 200 | |
| Shot-to-Cylinder Size | - | % | 30 - 70 | |
| Standard Melt temperature | - | °C | 300 | |
| Vent Depth | - | mm | 0.025 - 0.075 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Burning behavior UL 94 (1.5 mm) [UL recognition] | UL 94 | 1.5 mm | Class | V-2 |
| Burning behavior UL 94 [UL recognition] | UL 94 | 2.2 mm | Class | V-0 |
| Burning behavior UL 94-5V [UL recognition] | UL 94 | 3.0 mm | Class | 5VA |
| Glow wire test (GWFI) [UL recognition] | IEC 60695-2-12 | 2.2 mm | °C | 960 |
| Glow wire test (GWFI) [UL recognition] | IEC 60695-2-12 | 1.5 mm | °C | 960 |
| Glow wire test (GWFI) [UL recognition] | IEC 60695-2-12 | 3.0 mm | °C | 960 |
| Glow wire test (GWIT) [UL recognition] | IEC 60695-2-13 | 2.2 mm | °C | 930 |
| Glow wire test (GWIT) [UL recognition] | IEC 60695-2-13 | 1.5 mm | °C | 930 |
| Glow wire test (GWIT) [UL recognition] | IEC 60695-2-13 | 3.0 mm | °C | 960 |
| Relative temperature index (Electric strength) [UL recognition] | UL 746B | 1.5 mm | °C | 125 |
| Relative temperature index (Tensile impact strength) [UL recognition] | UL 746B | 1.5 mm | °C | 80 |
| Relative temperature index (Tensile strength) [UL recognition] | UL 746B | 1.5 mm | °C | 85 |
| Temperature of deflection under load | ISO 75-1,-2 | 0.45 MPa | °C | 118 |
| Temperature of deflection under load | ISO 75-1,-2 | 1.80 MPa | °C | 106 |
| Vicat softening temperature | ISO 306 | 50 N; 120 °C/h | °C | 124 |
| Vicat softening temperature | ISO 306 | 50 N; 50 °C/h | °C | 123 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Charpy impact strength | ISO 179/1eU | 23 °C | kJ/m² | N |
| Izod notched impact strength | ISO 21305/based on ISO 180/A | 23 °C/ 3 mm | kJ/m² | 8C |
| Izod notched impact strength | ISO 21305/based on ISO 180/A | -30 °C/ 3 mm | kJ/m² | 8C |
| Strain at break | b.o. ISO 527-1,-2 | 50 mm/min | % | 100 |
| Stress at break | ISO 527-1,-2 | 50 mm/min | MPa | 75 |
| Tensile modulus | ISO 527-1,-2 | 1 mm/min | MPa | 2500 |
| Yield strain | ISO 527-1,-2 | 50 mm/min | % | 5 |
| Yield stress | ISO 527-1,-2 | 50 mm/min | MPa | 75 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Haze for transparent materials | ISO 14782 | 3 mm | % | 0.9 |
| Luminous transmittance | ISO 13468-2 | 3 mm | % | 88 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Melt mass-flow rate | ISO 1133 | 300 °C/ 1.2 kg | g/10 min | 12 |
| Melt volume-flow rate | ISO 1133 | 300 °C/ 1.2 kg | cm³/10 min | 12 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Injection molding - Injection velocity | ISO 294 | mm/s | 200 | |
| Injection molding - Melt temperature | ISO 294 | °C | 290 | |
| Injection molding - Mold temperature | ISO 294 | °C | 80 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
