Dispercoll® U 84
Anionic, high molecular weight polyurethane dispersion.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Anionic, high molecular weight polyurethane dispersion.
Dispercoll® U 84 is a raw material for the production of water-based contact adhesives for 2-component spray coagulation processes, in which the joining process takes place wet and immediately after application of the adhesive polymer, for example for foam bonding application. Furthermore Dispercoll® U 84 is suitable for the production of water-based thermally activated adhesives.
Dispercoll® U 84 is a raw material for the production of water-based contact adhesives for 2-component spray coagulation processes, in which the joining process takes place wet and immediately after application of the adhesive polymer, for example for foam bonding application. Furthermore Dispercoll® U 84 is suitable for the production of water-based thermally activated adhesives.
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 5 - 23 °C, temperatures higher than
30 °C should be avoided.
- Protect from direct sunlight, frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Prolonged storage at higher temperatures may affect the product properties and possibly resulting in sedimentation or coagulation.
Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.
Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 23 °C, temperatures higher than
30 °C should be avoided.
- Protect from direct sunlight, frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Prolonged storage at higher temperatures may affect the product properties and possibly resulting in sedimentation or coagulation.
Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.
Contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Minimum film-forming temperature | DIN ISO 2115 | °C | approx. 5 |
| Density at 20 °C | DIN 51757 | g/cm3 | approx. 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| pH-value | DIN ISO 976 | 6.0 - 9.0 | |
| Viscosity at 23 °C,spindle L 2 / 30 rpm | M092-ISO 2555 | mPa*s | < 1,000 |
| Non-volatile content (1g / 1h / 125 °C) | DIN EN ISO 3251 | % | 38 - 42 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
