- Adhesives
- Coatings, paints & inks
Dispercoll® S 3030
Aqueous colloidal solution of amorphous Silicon dioxid, suitable as a component to improve moisture resistance and heat resistance of waterborne polychloroprene adhesives based on Dispercoll® C .
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Nano-silica dispersion
Material
- Coatings, paints & inks
- Solvent-free, Hard, Waterborne
- Adhesives
- Waterborne, Heat resistant, Solvent-free, Contact adhesive
General Characterization
Dispercoll S 3030 is an aqueous anionic colloidal solution of amorphous Silicon dioxid.
Dispercoll S 3030 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of Nano-Zinc Oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
Dispercoll S 3030 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of Nano-Zinc Oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
Storage Conditions
Dispercoll S 3030 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product is sensitive to frost and must not be stored at temperatures below 5°C. Frozen product is irreversibly damaged. Containers must be kept sealed, otherwise the evaporation of water or contamination will result in damage the material. Recommended storage temperature is 10º-25ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| pH | approx. 10 | ||
| Average particle size (approx. mean value calculatedfrom the spec. surface) | nm | approx. 9 | |
| Specific surface | m^2/g | approx. 300 | |
| Density | g/cm^3 | approx. 1.21 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Concentration | % | 30 - 31 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
