i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 散体
- 纳米二氧化硅分散体
材料
- 涂料、油漆和油墨
- 无溶剂, 坚硬, 水性
- 胶粘剂
- 水性, 耐热, 无溶剂, 接触型粘合剂
一般特征
Dispercoll S 3030 is an aqueous anionic colloidal solution of amorphous Silicon dioxid.
Dispercoll S 3030 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of Nano-Zinc Oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
Dispercoll S 3030 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll C dispersions. The proper viscosity for a particular application can be obtained through the addition of Nano-Zinc Oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
储存条件
Dispercoll S 3030 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product is sensitive to frost and must not be stored at temperatures below 5°C. Frozen product is irreversibly damaged. Containers must be kept sealed, otherwise the evaporation of water or contamination will result in damage the material. Recommended storage temperature is 10º-25ºC.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| pH | approx. 10 | ||
| Average particle size (approx. mean value calculatedfrom the spec. surface) | nm | approx. 9 | |
| Specific surface | m^2/g | approx. 300 | |
| Density | g/cm^3 | approx. 1.21 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Concentration | % | 30 - 31 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
