- Adhesives
Dispercoll® S 3020
Aqueous anionic colloidal solution of amorphous Silicon dioxid. Dispercoll® S 3020 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll® C dispersions.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Adhesives
- Solvent-free
General Characterization
Aqueous anionic colloidal solution of amorphous Silicon dioxid.
Dispercoll® S 3020 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll® C dispersions.
The proper viscosity for a particular application can be obtained through the addition of Nano-Zinc Oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
Dispercoll® S 3020 is particularly suitable for 1-K spray formulations with low pH values on the basis of Dispercoll® C, which is due to its lower alkaline content resulting in an excellent storage stability.
Dispercoll® S 3020 is intended as a component for waterborne polychloroprene adhesives based on Dispercoll® C dispersions.
The proper viscosity for a particular application can be obtained through the addition of Nano-Zinc Oxide to the adhesive formulation. These adhesive formulations will show improved moisture resistance and a higher heat resistance.
Dispercoll® S 3020 is particularly suitable for 1-K spray formulations with low pH values on the basis of Dispercoll® C, which is due to its lower alkaline content resulting in an excellent storage stability.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 25 °C.
- Protect from frost, heat and foreign material.
General information: The product is sensitive to frost and must not be stored at temperatures below 5 °C. Frozen product is irreversibly damaged. Containers must be kept sealed, otherwise the evaporation of water or contamination will result in damage the material.
- Recommended storage temperature: 10 - 25 °C.
- Protect from frost, heat and foreign material.
General information: The product is sensitive to frost and must not be stored at temperatures below 5 °C. Frozen product is irreversibly damaged. Containers must be kept sealed, otherwise the evaporation of water or contamination will result in damage the material.
Sampling
No data available
Packaging Type
150 kg one way-PE-drums, other container sizes on request available.
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Specific surface | ASTM D8016 | m2/g | approx. 160 |
Average particle size (approx. mean value calculatedfrom the spec. surface) | nm | approx. 15 | |
Density | DIN 51757 | g/cm3 | approx. 1.20 |
pH | DIN ISO 976 | approx. 3 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Ignition residue | ASTM D4052 | % | 29 - 31 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com