- Coatings, paints & inks
Desmophen® 1300 X
Polyester polyol.As the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polyester resin
Material
- Coatings, paints & inks
- Fast curing
General Characterization
Desmophen 1300 X is a polyester polyol.
It is suitable as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings.
It is suitable as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings.
Storage Conditions
Desmophen 1300 X should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. The product is slightly hygroscopic. Recommended storage temperature is less than 30ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Equivalent weight | approx. 530 | ||
Density at 20°C | g/ml | approx. 1.05 | |
Flash point | °C | approx. 29 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Viscosity at 23°C | mPa∙s | 3,450 ± 350 | |
Acid value | mg KOH/g | 9 ± 3 | |
Non-volatile content (2g resin/2ml toluene/1h/125°C, convection oven) | % | 75 ± 1 | |
Water content | % | ≤ 0.1 | |
Iodine color value | ≤ 4 | ||
Hydroxyl content | % | 3.2 ± 0.3 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com