- Coatings, paints & inks
Desmophen® 1300 X
Polyester polyol.As the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polyester resin
Material
- Coatings, paints & inks
- Fast curing
General Characterization
Polyester polyol.
As the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings.
As the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: max. 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is slightly hygroscopic.
- Recommended storage temperature: max. 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is slightly hygroscopic.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Alternative carbon share ^1 bio-based | calculated | % | approx. 23 |
^1 not originating from primary fossil sources | |||
Flash point | DIN EN ISO 1523 | °C | approx. 29 |
Equivalent weight | approx. 530 | ||
Density at 20 °C | DIN EN ISO 2811-2 | g/ml | approx. 1,05 |
Alternative raw material share ^1 bio-based | calculated | wt.-% | approx. 21 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Hydroxyl content | DIN EN ISO 4629-2 | % | 3.2 ± 0.3 |
Acid value | DIN EN ISO 2114 | mg KOH/g | 9 ± 3 |
Viscosity at 23 °C | DIN EN ISO 3219/A.3 | mPa*s | 3,450 ± 350 |
Water content | DIN 51 777/1 | % | ≤ 0.1 |
Iodine color value | DIN EN 1557 | ≤ 4 | |
Non-volatile content 2 g resin/2 ml toluene/ 1 h at 125 °C, convection oven | DIN EN ISO 3251 | 75 ± 1 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com