- Coatings, paints & inks
Desmophen® 1300 BA
Polyester polyol.As the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polyester resin
Material
- Coatings, paints & inks
- Fast curing
General Characterization
Desmophen 1300 BA is a polyester polyol.
It is suitable as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings.
It is suitable as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings.
Storage Conditions
Desmophen 1300 BA should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. The product is slightly hygroscopic. Recommended storage temperature is less than 30oC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Equivalent weight | approx. 530 | ||
| Flash point | °C | approx. 30 | |
| Density at 20°C | g/ml | approx. 1.06 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Acid value | mg KOH/g | 9 ± 3 | |
| Viscosity at 23°C | mPa∙s | 1,000 ± 200 | |
| Water content | % | ≤ 0.1 | |
| Hydroxyl content | % | 3.2 ± 0.3 | |
| Iodine color value | ≤ 4 | ||
| Non-volatile content (2g resin/2ml toluene/1h/125°C, convection oven) | % | 75 ± 1 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
