- Adhesives
- Coatings, paints & inks
Desmodur® VL 50
Aromatic polyisocyanate based on diphenylmethane diisocyanate.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PIC
- PMDI
- MDI
- Aromatic polyisocyanate
- Polyisocyanate
- Polyisocyanurate
- Isocyanate
- Reactive system
Material
- Coatings, paints & inks
- Solvent-free, Flexible, Elastic
- Adhesives
- Solvent-free
General Characterization
Aromatic polyisocyanate based on diphenylmethane diisocyanate.
In combination with suitable low-viscosity Desmophen® grades to formulate self-levelling, two-component polyurethane coating and sealing compounds, as well as solvent-free, two-component polyurethane primers and thin-coat finishes.
In combination with suitable low-viscosity Desmophen® grades to formulate self-levelling, two-component polyurethane coating and sealing compounds, as well as solvent-free, two-component polyurethane primers and thin-coat finishes.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Storage at higher temperatures may result in an increase in viscosity and at lower temperatures in the formation of crystalline deposits.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Storage at higher temperatures may result in an increase in viscosity and at lower temperatures in the formation of crystalline deposits.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 20°C | DIN EN ISO 2811-3 | g/ml | approx. 1.22 |
| Flash point | DIN EN ISO 2719 | °C | > 200 |
| Equivalent weight | 129 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity 25 °C | MDI-01-02 | mPa*s | 22.5 ± 7.5 |
| NCO | MDI-01-01 | % | 32.5 ± 1.0 |
| Acidity (HCI) | MDI-01-03 | mg/kg | ≤ 600 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
