Desmodur® ultra DN
Hydrophilic aliphatic polyisocyanate based on hexamethyliisocyanat (HDI).
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Hydrophilic aliphatic polyisocyanate based on hexamethyliisocyanat (HDI).
Desmodur® ultra DN is a liquid and in aqueous polymer dispersions emulsifiable polyisocyanat. Occasional turbidity or coagulation is caused by small amounts of process additives. This does not influence the cured adhesive process or final properties. It can be used as a crosslinker for continuous ph-neutral aqueous polymer dispersions. Amongst others, polyurethane, polyvinyl acetate, polyacrylate, as well as synthetic rubber dispersions. The crosslinking process increases the adhesive consistency against warmth, water, plasticizers and numerous other solvents.
Desmodur® ultra DN is a liquid and in aqueous polymer dispersions emulsifiable polyisocyanat. Occasional turbidity or coagulation is caused by small amounts of process additives. This does not influence the cured adhesive process or final properties. It can be used as a crosslinker for continuous ph-neutral aqueous polymer dispersions. Amongst others, polyurethane, polyvinyl acetate, polyacrylate, as well as synthetic rubber dispersions. The crosslinking process increases the adhesive consistency against warmth, water, plasticizers and numerous other solvents.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Flash point | DIN 51 755 | °C | approx. 218 |
Density at 20 °C | DIN 51 757 | g/cm3 | approx. 1.15 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
NCO content | M105-ISO 11909 | % | 21.8 ± 0.5 |
Monomeric HDI | M106-ISO 10283 | % | < 0.10 |
Viscosity at 23 °C, Rotation | M014-ISO 3219/A.3 | mPa*s | 1,250 ± 300 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com