• Adhesives

Desmodur® T 100

Pure 2,4-toluene diisocyanate (TDI).As a raw material for polyurethane coatings and adhesives.

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

  • TDI
  • Isocyanate

Material

Adhesives
Solvent-free

General Characterization

Pure 2,4-toluene diisocyanate (TDI).
As a raw material for polyurethane coatings and adhesives.

Storage Conditions

- Storage in original sealed Covestro container.

- Recommended storage temperature: 25 - 40 °C.

- Protect from moisture, heat and foreign material.

General information: The product is sensitive to moisture and heat. It should be protected against contact with atmospheric moisture. Higher storage temperatures for prolonged periods may result in discoloration or the formation of insoluble deposits. The product crystallizes partially or fully at temperatures below 22 °C. However, careful melting at up to 50 °C will reliquify the product without any detrimental effect on its quality. A contact temperature of 80 °C must not be exceeded. The reliquified product must be homogenized as crystallization causes a shift in the isomer ratio between the crystalline and the still liquid phases. Opened containers must be resealed after removing product. If stored for long periods, the product should be overlaid with nitrogen. The product reacts with water to release carbon dioxide. During storage, transfer and handling of the product, contact with water in any form (damp containers, solvents containing water, moist air) must be prevented as the generation of carbon dioxide may result in a dangerous increase in pressure. The polyureas which are formed at the same time may result in turbidity. They may also cause blockages and breakdowns in filters, pumps and pipes.

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Characteristics

Property Name Test Method Unit Value
Hydrolysable chlorine TDI-01-03 mg/kg ≤ 20
Purity TDI-01-01 % ≥ 99.5
Content of 2,4-TDI TDI-01-04 % ≥ 99.0
Acidity TDI-01-02 mg/kg ≤ 20

Specifications

Property Name Test Method Unit Value
Isocyanate content % ≥ 48
Solidification point DIN 53175 °C approx. 21
Isocyanate content % ≥ 48
Flash point DIN EN 22719 °C approx. 131
Density at 25 °C DIN 51757 g/cm^3 approx. 1,21
Viscosity at 25 °C DIN EN ISO 12058 mPa*s approx. 3
Boiling point (1 bar) °C approx. 253

Downloads

Technical Data Sheet
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com

Do you want to know more about Desmodur® T 100?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

Compare