Submit

Desmodur® PC-N

Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI).

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

No data available

General Characterization

Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI).
Desmodur® PC-N is a modified diisocyanate that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives.

Storage Conditions

- Storage in original sealed Covestro container.

-
Recommended storage temperature: 20 - 25 °C.

-
Protect from moisture, heat and foreign material.


General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Prolonged storage at temperatures above 25 °C results in a deterioration in quality as the product becomes increasingly turbid owing to the formation of a sediment (dimers) that is not readily soluble. For example, storage stability at 40 °C is limited to a maximum of 4 months. Storage at too low temperature results in crystallisation which starts at around 15 °C. The storage of the crystallised product must be avoided as this promotes the formation of non-meltable dimers. As a result, the product can no longer be fully melted after around 3 weeks.
To prevent crystallization, it must be ensured that the product does not cool to below 15 °C. Upon receipt, samples of the product should be tested for crystallisation. If crystallisation has occurred during transportation or storage, the product must be remelted immediately. On no account should the temperature during melting (material temperature) exceed 70 °C nor should the time needed to reliquefy the product be exceeded as this will greatly promote the formation of non-meltable dimers.
It should be ensured that the entire content of the container is remelted and homogenised. The container must then be closed immediately and its content cooled to and kept at the standard storage temperature (20 - 25 °C). If the product is in a partially crystallised state for a brief period, there will be no significant effect on the product quality. Only the storage stability may be reduced slightly, i.e. remelted product should be used as soon as possible.

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Test Method Unit Value
Viscosity 25 °C MDI-01-02 mPa*s 120 ± 40
NCO MDI-01-01 % 26.0 ± 1.0
Hydrolyzable chlorine (Cl) MDI-01-04 mg/kg max. 50

Property Name Test Method Unit Value
Solidification temperature MDI-01-17 °C < 15
Vapor pressure at 20 °C (MDI) hPa -5
Density 25 °C DIN 51 757 g/cm3 1.22
Phenyl isocyanate content MDI-01-09 mg/kg max. 10

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Download

Related topics

Do you want to know more about Desmodur® PC-N?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

1 product to compare