- Coatings, paints & inks
Desmodur® E 20100
Modified polyisocyanate prepolymer based on diphenylmethane diisocyanate.As a binder for the formulation of injection resins for sealing water-conveying cracks in structures above and below ground.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PIC
- MDI
- Prepolymer
- Polyisocyanate
- Isocyanate
- Reactive system
Material
- Coatings, paints & inks
- Solvent-free
General Characterization
Modified polyisocyanate prepolymer based on diphenylmethane diisocyanate.
As a binder for the formulation of injection resins for sealing water-conveying cracks in structures above and below ground.
As a binder for the formulation of injection resins for sealing water-conveying cracks in structures above and below ground.
Storage Conditions
- Storage in original sealed
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product must be stored in airtight containers. Contact with atmospheric moisture causes a reaction which results first in an increase in viscosity and ultimately in gelling. As storage at elevated temperatures also results in an increase in viscosity, the product should be stored in a cool place. At temperatures below 0 °C, the product may crystallize partially. However, the crystals can be remelted by careful heating.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Flash point | DIN EN ISO 2719 | °C | > 200 |
| Density at 20 °C | DIN EN ISO 2811-3 | g/cm3 | approx. 1.12 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 1,100 ± 400 |
| NCO content | M105-ISO 11909 | % | 15.7 ± 0.5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
