- Adhesives
- Coatings, paints & inks
Desmodur® CQ ultra N 7390 BA
Biobased aliphatic polyisocyanate (PDI-trimer). As the hardener component for lightfast polyurethane coating systems.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PDI
- PIC
- Aliphatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Hardeners
- Polyisocyanurate
- Isocyanate
- Reactive system
Material
- Adhesives
- Bio origin, Solventborne, Moisture resistant, Ultra-low monomer
- Coatings, paints & inks
- Alternative raw material share, Bio origin, Hard, Weather resistant, Solventborne, Ultra-low monomer
General Characterization
Biobased aliphatic polyisocyanate (PDI-trimer).
As the hardener component for lightfast polyurethane coating systems.
As the hardener component for lightfast polyurethane coating systems.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Alternative raw material share ^2 bio-based, seggregated | calculated | Gew.-% | approx. 55 |
^2 elements not originating from primary fossil sources expressed as percentage of the total mass. | |||
Flash point | DIN 53213 | °C | approx. 42 |
Equivalent weight | approx. 211 | ||
^1 carbon not originating from primary fossil sources expressed as percentage of the total carbon. | |||
Density at 20 °C | DIN 53217 | g/ml | approx. 1.16 |
Alternative carbon share ^1 bio-based, seggregated | ASTM D 6866-16Method B (AMS) | % | approx. 63 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Monomeric PDI | M106-ISO 10283 | % | < 0.10 |
Color value (Hazen) | M017-EN 1557 | approx. 50 | |
Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | approx. 1.000 |
NCO content | M105-ISO 11909 | % | approx. 19.9 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com