- Coatings
Desmodur® BL 3575/1 MPA/SN
Blocked aliphatic polyisocyanate based on HDI. In combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- PIC
- Crosslinkers
- Hardeners
- Aliphatic polyisocyanate
- Isocyanate
- Polycarbonate polyol
- Polyisocyanurate
- Polyisocyanate
Material
- Coatings
- Solventborne, Flexible, Elastic, Thermally resistant
General Characterization
Desmodur BL 3575/1 MPA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).
It is suitable for use in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings.
It is suitable for use in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings.
Storage Conditions
Desmodur BL 3575/1 MPA/SN should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product. Recommended storage temperature is 0º-30ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Property Name | Test Method | Unit | Value |
---|---|---|---|
Hazen color value | ≤ 100 | ||
Non-volatile content (0.2g/60 min/80°C) | % | 75 ± 2 | |
Viscosity at 23^oC | mPa∙s | 3,600 ± 1,000 |
Property Name | Test Method | Unit | Value |
---|---|---|---|
Blocked NCO content | % | approx. 10.5 | |
Flash point | °C | approx. 53 | |
Equivalent weight | approx. 400 | ||
Density at 20^oC | g/ml | approx. 1.1 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com