- Coatings, paints & inks
Desmodur® BL 3370 MPA
Blocked aliphatic HDI-polyisocyanate.To formulate lightfast one-component stoving polyurethane coatings with high themal yellowing resistance; as an additive to improve flexibility and adhesion.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- HDI
- PIC
- Aliphatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Hardeners
- Polyisocyanurate
- Isocyanate
Material
- Coatings, paints & inks
- Thermally resistant, Flexible, Elastic, Solventborne
General Characterization
Blocked aliphatic polyisocyanate based on HDI.
In combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings with high resistance to thermal yellowing; as an additive in conventional stoving coating systems to improve the reactivity, flexibility and adhesion.
In combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings with high resistance to thermal yellowing; as an additive in conventional stoving coating systems to improve the reactivity, flexibility and adhesion.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Density | DIN EN ISO 2811 | g/cm3 | approx. 1.08 |
Blocked NCO content | % | approx. 8.9 | |
Viscosity at 25 °C | M014-ISO 3219/A.3 | mPa*s | approx. 3,200 |
Equivalent weight | approx. 470 | ||
Flash point | DIN 53 213/1 | °C | approx. 49 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Color (Hazen) | M017-EN 1557 | ≤ 60 | |
Non-volatile content (1 g / 60 min / 80 °C) | M020-ISO 3251 | % | 70 ± 3 |
Free NCO content, modified | M105-ISO 11909 | % | ≤ 0,20 |
Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 3,800 ± 1,200 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com