- Adhesives
Desmodur® 44 MC Flakes
Desmodur® 44 MC Flakes is a monomeric diphenylmethane-4,4'-diisocyanate (MDI).Desmodur® 44 M Flakes is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- MMDI
- Aromatic polyisocyanate
- Isocyanate
- Reactive system
Material
- Adhesives
- Solvent-free
General Characterization
Desmodur® 44 MC Flakes is a
monomeric diphenylmethane-4,4'-diisocyanate (MDI).
Desmodur® 44 MC Flakes is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives and polyurethane coating resins.
monomeric diphenylmethane-4,4'-diisocyanate (MDI).
Desmodur® 44 MC Flakes is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives and polyurethane coating resins.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: < 5 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Like all isocyanates, it reacts with water to form insoluble urea derivatives and carbon dioxide. In closed containers, the formation of carbon dioxide can results in a dangerous build-up of pressure. Contact with air, especially coupled with exposure to light, accelerates the yellowing of the product. Generally speaking, the processing properties are not affected by yellowing. As a result of dimerization (formation of uretdione), the product is sensitive to heat. The solid product dimerizes more quickly at room temperature than the liquid product stored at 42 °C. Therefore, solid product should be stored at temperatures below 5 °C and melted quickly and carefully. Although dimerization declines with decreasing temperature, the storage stability is also limited at 5 °C.
Detailed information on safe handling, transport and storage of isocyanates is given in the guidelines of the ISOPA association.
- Recommended storage temperature: < 5 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Like all isocyanates, it reacts with water to form insoluble urea derivatives and carbon dioxide. In closed containers, the formation of carbon dioxide can results in a dangerous build-up of pressure. Contact with air, especially coupled with exposure to light, accelerates the yellowing of the product. Generally speaking, the processing properties are not affected by yellowing. As a result of dimerization (formation of uretdione), the product is sensitive to heat. The solid product dimerizes more quickly at room temperature than the liquid product stored at 42 °C. Therefore, solid product should be stored at temperatures below 5 °C and melted quickly and carefully. Although dimerization declines with decreasing temperature, the storage stability is also limited at 5 °C.
Detailed information on safe handling, transport and storage of isocyanates is given in the guidelines of the ISOPA association.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Phenyl isocyanate content | (2011-0489801-95) | ppm | max. 10 |
Vapor pressure at 20 °C | hPa | < 10^-5 | |
NCO content (theoretical) | % by wt. | 33.6 | |
Freezing point | (2011-0260102-92) | °C | min. 38.4 |
Viscosity at 40 °C | (2011-0313703-95) | mPa*s | 4.1 |
Density at 40 °C | DIN 51 757 | g/cm3 | approx. 1.19 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Hydrolysable chlorine | MDI-01-04 | mg/kg | 50 ± 10 |
4,4'-MDI | MDI-01-06 | % | min. 98.2 |
2,4'-MDI | MDI-01-06 | % | max. 1.8 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com