- Coatings, paints & inks
- Adhesives
Bayhydur® ultra 2655
i
Market Switch
Selection will influence the results you get.
About
Product Types
- HDI
- PIC
- Hydrophilic polyisocyanate
- Aliphatic polyisocyanate
- Crosslinkers
- Polyisocyanate
- Hardeners
- Polyisocyanurate
- Isocyanate
- Reactive system
Material
- Coatings, paints & inks
- Waterborne, Weather resistant, Fast curing, Easy mixing, Ultra-low monomer
- Adhesives
- Waterborne
General Characterization
Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).
Hardener for waterborne two-component polyurethane systems.
Hardener for waterborne two-component polyurethane systems.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Density at 20 °C | DIN EN 2811 | g/cm3 | approx. 1.16 |
Flash point | DIN EN ISO 2719 | °C | approx. 192 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Monomeric HDI | M106-ISO 10283 | % | < 0.10 |
NCO content | M105-ISO 11909 | % | 20.3 - 21.3 |
Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 3,500 ± 1,000 |
Hazen color value | M017-EN 1557 | < 60 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com