Bayhydrol® UH 2864
Bayhydrol UH 2864 is an anionic aliphatic polyester-polyurethane dispersion. It can be used alone or blended with polyacrylic emulsion for the formulation of elastomeric construction coatings.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Non-reactive system
- Polyurethane
- Waterbased dispersion
- PU dispersion - high molecular
- PU dispersion
Material
No data available
General Characterization
Bayhydrol UH 2864 is an anionic aliphatic polyester-polyurethane dispersion.
It can be used alone or blended with polyacrylic emulsion for the formulation of elastomeric construction coatings.
It can be used alone or blended with polyacrylic emulsion for the formulation of elastomeric construction coatings.
Storage Conditions
Bayhydrol UH 2864 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to a maximum 50°C has no adverse effect on product properties. Recommended storage temperature is 5º-30ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 23^oC | g/cm^3 | approx. 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Non-volatile content (1 g / 1 h / 125^oC) | % | 57 - 61 | |
| pH | 6 - 8 | ||
| Efflux time at 23^oC4 mm cup | s | ≤ 90 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
