- Coatings, paints & inks
Bayhydrol® A 2470
Aqueous hydroxyfunctional polyacrylic dispersion.Waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- Acrylate dispersion
Material
- Coatings, paints & inks
- Flexible, Elastic, Hard, Waterborne
General Characterization
Bayhydrol A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion.
It is suitable for use in waterborne two-component polyurethane varnishes in combination with aliphatic polyisocyanates.
It is suitable for use in waterborne two-component polyurethane varnishes in combination with aliphatic polyisocyanates.
Storage Conditions
Bayhydrol A 2470 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. Short-time cooling down to -18°C does not typically damage the product, but the viscosity may increase significantly. Prolonged freezing can damage the product irreversibly. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10% solution of dimethyl ethanol amine. Recommended storage temperature is > 0º-30ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Acid value | mg KOH/g | approx. 10 | |
| Density at 20°C | g/ml | approx. 1.06 | |
| Hydroxyl content (on solid resin, calculated) | % | approx. 3.9 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| pH (1:4 in demineralized water) | 7.0 - 8.0 | ||
| Non-volatile content (1g/1h/125°C/convection oven) | % | 44 - 47 | |
| Viscosity at 23°C, D= approx. 40 s^-1 | mPa∙s | 1,500 - 3,000 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
